• Net sales (as reported) of $813 million, decreased 10% from prior year and increased 5% sequentially

• Adjusted net sales (excluding the impact of divestitures) increased 6% from prior year and 10% sequentially

• GAAP diluted EPS of $0.45

• Non-GAAP diluted EPS of $0.71

BILLERICA, Mass.--(BUSINESS WIRE)--Jul. 31, 2024-- Entegris, Inc. (NASDAQ: ENTG), today reported its financial results for the Company’s second quarter ended June 29, 2024.

Bertrand Loy, Entegris’ president and chief executive officer, said: “The Entegris team delivered another quarter of strong performance and execution. Sales (excluding divestitures) increased 10 percent sequentially and were up in all three divisions and in most product lines.”

Mr. Loy added: "2024 continues to be a transition year for the semiconductor industry. We feel good about the improving fundamentals of the semi market and expect it will gradually recover in the second half of this year, albeit at a more moderate pace than previously expected. In the second half of 2024, we will continue to position the company for strong growth acceleration into 2025.”

“The compounding process complexity of our customers’ roadmaps is making Entegris expertise in materials science and materials purity increasingly valuable,” he said. “This is expected to translate into higher Entegris content per wafer, expanding served market, and fuel our market outperformance.”

Quarterly Financial Results Summary

(in thousands, except percentages and per share data)

Third Quarter Outlook

For the Company’s guidance for the third quarter ending September 28, 2024, the Company expects sales of $820 million to $840 million. The midpoint of this guidance range represents a 10% year-on-year increase, excluding the impact of divestitures. GAAP net income of $78 million to $85 million and diluted earnings per common share is expected to be between $0.51 and $0.56. On a non-GAAP basis, the Company expects diluted earnings per common share to range from $0.75 to $0.80, reflecting net income on a non-GAAP basis in the range of $114 million to $121 million. The Company also expects adjusted EBITDA of approximately 28.5% to 29.5% of sales.

Segment Results

The Company operates in three segments:

Materials Solutions (MS): MS provides materials-based solutions, such as chemical mechanical planarization slurries and pads, deposition materials, process chemistries and gases, formulated cleans, etchants and other specialty materials that enable our customers to achieve better device performance and faster time to yield, while providing for lower total cost of ownership.

Microcontamination Control (MC): MC offers advanced filtration solutions that improve customers’ yield, device reliability and cost by filtering and purifying critical liquid chemistries and gases used in semiconductor manufacturing processes and other high-technology industries.

Advanced Materials Handling (AMH): AMH develops solutions that improve customers’ yields by protecting critical materials during manufacturing, transportation, and storage including products that monitor, protect, transport and deliver critical liquid chemistries, wafers, and other substrates for a broad set of applications in the semiconductor, life sciences and other high-technology industries.

Second-Quarter Results

Entegris will hold a conference call to discuss its results for the second quarter on Wednesday, July 31, 2024, at 9:00 a.m. Eastern Time. Participants should dial 800-225-9448 or +1 203-518-9708, referencing confirmation ID: ENTGQ224. Participants are asked to dial in 10 minutes prior to the start of the call. For the live webcast and replay of the call, please Click Here.

Management’s slide presentation concerning the results for the second quarter will be posted on the Investor Relations section of www.entegris.com.

About Entegris

Entegris is a leading supplier of advanced materials and process solutions for the semiconductor and other high-tech industries. Entegris has approximately 8,000 employees throughout its global operations and is ISO 9001 certified. It has manufacturing, customer service and/or research facilities in the United States, Canada, China, Germany, Israel, Japan, Malaysia, Singapore, South Korea, and Taiwan. Additional information can be found at www.entegris.com.

Non-GAAP Information

The Company’s condensed consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States (GAAP). Adjusted Net Sales, Adjusted EBITDA, Adjusted Gross Profit, Adjusted Segment Profit, Adjusted Operating Income, non-GAAP Net Income, non-GAAP Adjusted Operating Margin and diluted non-GAAP Earnings Per Common Share, together with related measures thereof, are considered “non-GAAP financial measures” under the rules and regulations of the Securities and Exchange Commission. The presentation of this financial information is not intended to be considered in isolation or as a substitute for, or superior to, the financial information prepared and presented in accordance with GAAP. The Company provides supplemental non-GAAP financial measures to better understand and manage its business and believes these measures provide investors and analysts additional and meaningful information for the assessment of the Company’s ongoing results. Management also uses these non-GAAP measures to assist in the evaluation of the performance of its business segments and to make operating decisions. Management believes that the Company’s non-GAAP measures help indicate the Company’s baseline performance before certain gains, losses or other charges that may not be indicative of the Company’s business or future outlook, and that non-GAAP measures offer a more consistent view of business performance. The Company believes the non-GAAP measures aid investors’ overall understanding of the Company’s results by providing a higher degree of transparency for such items and providing a level of disclosure that will help investors generally understand how management plans, measures and evaluates the Company’s business performance. Management believes that the inclusion of non-GAAP measures provides greater consistency in its financial reporting and facilitates investors’ understanding of the Company’s historical operating trends by providing an additional basis for comparisons to prior periods. The reconciliations of GAAP net sales to Adjusted Net Sales (excluding divestitures), GAAP gross profit to Adjusted Gross Profit, GAAP segment profit to Adjusted Operating Income, GAAP net income to Adjusted Operating Income and Adjusted EBITDA, GAAP net income and diluted earnings per common share to non-GAAP Net Income and diluted non-GAAP Earnings Per Common Share and GAAP outlook to non-GAAP outlook are included elsewhere in this release.

Cautionary Note on Forward-Looking Statements

This news release contains “forward-looking statements.” The words “believe,” “expect,” “anticipate,” “intend,” “estimate,” “forecast,” “project,” “should,” “may,” “will,” “would” or the negative thereof and similar expressions are intended to identify such forward-looking statements. These forward-looking statements may include statements about fluctuations in demand for semiconductors; global economic uncertainty and the risks inherent in operating a global business; supply chain matters; inflationary pressures; future period guidance or projections; the Company’s performance relative to its markets, including the drivers of such performance; market and technology trends, including the duration and drivers of any growth trends; the development of new products and the success of their introductions; the focus of the Company’s engineering, research and development projects; the Company’s ability to obtain, protect and enforce intellectual property rights; information technology risks; the Company’s ability to execute on our business strategies, including the Company’s expansion of its manufacturing presence in Taiwan and in Colorado Springs; the Company’s capital allocation strategy, which may be modified at any time for any reason, including with respect to share repurchases, dividends, debt repayments and potential acquisitions; the impact of the acquisitions and divestitures the Company has made and commercial partnerships the Company has established, including the acquisition of CMC Materials, Inc. (now known as CMC Materials LLC) (“CMC Materials”); the amount of goodwill we carry on our balance sheets; key employee retention; future capital and other expenditures, including estimates thereof; the Company’s expected tax rate; the impact, financial or otherwise, of any organizational changes or changes in the legal and regulatory environment in which we operate; the impact of accounting pronouncements; quantitative and qualitative disclosures about market risk; climate change and our environmental, social and governance commitments; and other matters. These forward-looking statements are based on current management expectations and assumptions only as of the date of this news release, are not guarantees of future performance and involve substantial risks and uncertainties that are difficult to predict and that could cause actual results to differ materially from the results expressed in, or implied by, these forward-looking statements. These risks and uncertainties include, but are not limited to, weakening of global and/or regional economic conditions, generally or specifically in the semiconductor industry, which could decrease the demand for the Company’s products and solutions; the level of, and obligations associated with, the Company’s indebtedness, including the debts incurred in connection with the acquisition of CMC Materials; risks related to the acquisition and integration of CMC Materials, including the ability to achieve the anticipated value-creation contemplated by the acquisition of CMC Materials; raw material shortages, supply and labor constraints, price increases, inflationary pressures and rising interest rates; operational, political and legal risks of the Company’s international operations; the Company’s dependence on sole source and limited source suppliers; the Company’s ability to meet rapid demand shifts; the Company’s ability to continue technological innovation and introduce new products to meet customers’ rapidly changing requirements; substantial competition; the Company’s concentrated customer base; the Company’s ability to identify, complete and integrate acquisitions, joint ventures, divestitures or other similar transactions; the Company’s ability to effectively implement any organizational changes; the Company’s ability to protect and enforce intellectual property rights; the impact of regional and global instabilities, hostilities and geopolitical uncertainty, including, but not limited to, the ongoing conflicts between Ukraine and Russia, between Israel and Hamas and other tensions in the Middle East, as well as the global responses thereto; the increasing complexity of certain manufacturing processes; changes in government regulations of the countries in which the Company operates, including the imposition of tariffs, export controls and other trade laws, restrictions and changes to national security and international trade policy, especially as they relate to China; fluctuation of currency exchange rates; fluctuations in the market price of the Company’s stock; and other risk factors and additional information described in the Company’s filings with the U.S. Securities and Exchange Commission (the “SEC”), including under the heading “Risk Factors” in Item 1A of the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2023, filed on February 15, 2024, and in the Company’s other SEC filings. Except as required under the federal securities laws and the rules and regulations of the SEC, the Company undertakes no obligation to update publicly any forward-looking statements or information contained herein, which speak as of their respective dates.

View source version on businesswire.com: https://www.businesswire.com/news/home/20240731830670/en/

Bill Seymour
VP of Investor Relations
T + 1 952 556 1844
bill.seymour@entegris.com

Source: Entegris, Inc.